Non-Contact Hall Effect Sensor with Life Cycle up to 10 Million Rotations | BI Technologies
TT electronics BI Technologies has developed a non-contact single-turn Hall Effect sensor providing design engineers with a high accuracy, high resolution, long life cycle precision device. Designated MagnePot, the Model 6120 Hall Effect position sensor features extremely low mechanical torque with a programmable electrical angle from five to 360 degrees. The MagnePot Hall Effect position sensors are available in three standard styles as well as custom configurations: 1/8” shaft, 1/4” bushing; 1/8” shaft, 3/8” bushing; and 1/4” shaft, 3/8” bushing. Standard independent linearity is ±0.5%, with tighter linearity available on spec units. Typical output voltage ranges from 0.25Vdc to 4.75Vdc, while input voltage ranges from 4.5Vdc to 5.5Vdc. Minimum insulation resistance is 1,000MΩ, and operating temperature ranges from -40°C to +125°C. With the high accuracy and high resolution of the device, as well as multiple factory-programmable output profiles ranging from linear to non-linear (multi-slope or piece-wise linear), the single-turn Hall Effect sensor is ideally suited for three-wire voltage divider applications. Custom configurations are also available upon request.
Features & Benefits:
- Contact-less
-
10 Million Shaft Revolutions
-
Programmable Angle from 5 - 360 degrees effective electrical
-
Extremely low rotational torque
-
Multiple Factory Programmable Outputs (linear, non-linear multi-slope)
-
Sealing available to IP66
Applications:
- Joystick Controls (X-Y axis)
-
Valve Feedback Positioning
-
String Potentiometers
-
Wig Wag Controls
-
Weather Vanes
Additional Information:
