• Home
• >
• Nichicon UHM Series Low-ESR Caps

Low impedance is a feature of the Nichicon UHM series of electrolytic capacitors. With the addition of further ratings low impedance is now available for a number of higher capacitance values. Capacitance range has been extended from 330 to 12000uF (was 470 to 3300uF), tolerance is ±20% with low impedance now available (10, 9, and 8mΩ) for the higher capacitance values. Impedance range is from 8 to 30mΩ, working voltage 6.3 to 16V DC and maximum rating ripple 3250mA (was 2800mA). As a direct result of the wide -40 to +105°C temperature range, load life for the HM series is 2kh at 105°C (64kh at 55°C). For applications where space is at a premium, the radial lead electrolytic capacitors range in size from 8mm diameter by 11.5mm long to 18 x 25mm.

Nichicon UHM Series Performance Characteristics
Category Temperature Range	-40~+105°C
Rated Voltage Range	330~12000µF
Capacitance Tolerance	±20% (120Hz, 20°C)
Leakage Current	After 2 minutes application of rated voltage, leakage current is less than 0.03V
Dissipation Factor	Rated Voltage		6.3	10	16	120Hz, 20°C
	Dissipation Factor (Max.)		0.22	0.19	0.16
Stability at Low Temperature	Rated voltage		6.3	10	16	120Hz
	impedance ratio ZT/Z20	Z-40°C/Z+20°C	3	3	3
Endurance	After an application of D.C. bias voltage plus the rated ripple current for 2000 hours at 105°C the voltage shall not exceed the rated D.C. voltage, capacitors meet the characteristic requirements listen in the data sheet below.
	Capacitance Change		Within ±25% of initial value
	Dissipation Factor		200% or less of initial specified value
	Leakage Current		Initial specific value or less
Marking	Printed with white color black sleeve

Features & Benefits:

• Lower impedance than HD, HC Series

< Back to Nichicon Capacitors