Printer Friendly

Snap-In Aluminium Electrolytic Capacitors | Kemet

Electrolytic capacitors consist of aluminum foil which is first etched to increase its surface area. Separate, carefully designed etching techniques are used for the anode and cathode foils. A layer of aluminum oxide, an excellent dielectric, is formed on the surface of the etched anode foil before the foils are wound together between special separator papers. At the same time, tabs are welded to the foils to form the connections. The wound assembly is impregnated with a liquid electrolyte. This electrolyte is a precisionmade compound which fully impregnates the etched foil, providing a low ESR conductive path to the cathode foil with stable electrical and chemical properties. KEMET crafts its own electrolytes to match the etched foil characteristics and desired final properties. The assembly is packaged in such a way as to provide excellent vibration resistance and low thermal resistance.

 
ALC
ELG
ELH
  Buy Now button Buy Now button Buy Now button
Temperature Range

-40 to +85°C

-40 to 105°C

-40 to 85°C

Capacitance Range

10000μF

47μF - 82000μF

47μF - 120000μF

Voltage Range

50 - 100VDC

6.3 - 450VDC

6.3 - 450VDC

Life Expectancy @ Rated Voltage, Rated Temperature

29000 hours

2000 hours

2000 hours

Benefits
  • 2 pin solder tag
  • Long life
  • Slit foil technolgy
  • 2 pin snap-in terminals
  • High reliability
  • Low ESR
  • Different case size available for capacitance value
  • 2 pin snap-in terminals
  • High reliability
  • Low ESR
  • Different case size available for capacitance value
  •   KEMET Evox Rifa Datasheet View Datasheet KEMET Evox Rifa Datasheet View Datasheet KEMET Evox Rifa Datasheet View Datasheet

     

    Additional Information

    Selection Guidelines for SMD Capacitors