Printer Friendly

> 5 < 10 Amps Contacts & Connectors Product Family Overview | TE Connectivity

TE-Dyn-ALLsm.jpgDynamic Series Connectors | TE Connectivity
Dynamic Series is a broad product family that provides connector solutions ranging from signal level circuitry through power circuit connectivity in a ruggedized, industrialized package.
(More Info)

amp_edge.jpgAMP EDGE PC Terminals Single Lead | TE Connectivity
AMP EDGE Terminals are quick connect/disconnect devices that adjust securely, through friction fitting, to machine slots in the type of board for which they are designed. Friction fitting not only precleans the contact areas, but also provides excellent vibration and shock resistance even under heavy stresses.
(Check TTI Inventory)

doublelock_tyco_thumb.jpgAMP Power Double Lock Connectors | TE Connectivity
AMP Power Double Lock connectors offer a compact design for use in power circuit applications in refrigerators, air conditioners, washing machines, gas equipment, copying machines and automatic vending machines. These connectors can be used singly by inserting wire-terminated crimp snap-in contacts into the housing.
(More Info)

AMP-Standard-Timer-Connectors-Tyco-Electronics-1.jpgAMP Standard Timer Connectors (RAST 5 Appliance) | TE Connectivity
AMP Standard Power Timer contacts, for use with Standard Timer housings, are suitable for high-density and high-current carrying requirements. The modular connector system incorporates modern in-line mating technology on a 5 mm centerline, 2 to 12 positions, rowable with no loss of spacing and a variety of keying possibilities.
(More Info)

cpc_thumb.jpgCircular Plastic Connectors (CPC) | TE Connectivity
CPC is a rugged, cost-effective connector that can be used to provide power input and output to and from virtually any device.
(More Info)

mseries_thumb.jpgPin and Socket Connectors M Series | TE Connectivity
Connectors that intermate with other connectors made to MIL-C-28748 requirements. There is a wide range of styles and sizes: standard (unloaded), posted (preloaded), mixed, high voltage, and V.35. Positions range from 2 to 160.
(More Info)

metri_thumb.jpgMetrimate Connectors | TE Connectivity
AMP Metrimate connectors are true metric specification connectors designed for panel, free-hanging or pc board application. These connectors offer improvements in durability, density and electrical performance over competitive soft-shell pin and socket connectors. This versatile pin and socket connector line is designed to meet the general requirements of various testing and approval agencies, including UL, CSA, VDE and IEC.
(More Info)

mini_two_thumb.jpgMATE-N-LOK II Connectors Mini-Universal | TE Connectivity
These high density headers and housings, with positions ranging from 1-24, offers a .163 inch centerline. Seals are available for splash protection. Available for wire-to-wire and wire-to-board applications, these connectors mate with standard Mini-Universal MATE-N-LOK headers.
(More Info)

uni_mininew_thumb.jpgMATE-N-LOK Connectors Mini-Universal | TE Connectivity
These high density headers and housings, with positions ranging from 1-24, offer a .163 inch centerline. Seals are available for splash protection.
(More Info)

mta_connect.jpgMTA 100 Connectors | TE Connectivity
The MTA-100 IDC connector system is a wire-to-board and wire-to-wire system with contacts in a single row on .100 [2.54] centerline. The design features wire feed-through capability for daisy-chain applications.
(Check TTI Inventory)

multi_thumb.jpgMultimate Contacts | TE Connectivity
Multimate Contacts are a same style contact may be used in different connector housings, and many housings accept more than one type of contact. Allows the user to select the contact/housing combination best suited to the application, while keeping inventory costs to a minimum. Available in strip form for machine applications. Provides for lowest applied cost and loose piece form.
(More Info)

printed_circuitboards.jpgPrinted Circuit Board Disconnects | TE Connectivity
AMP printed circuit disconnect embodies the dual features of automation and the ability to make quick wiring changes. The special formed pins, available in .058 [1.47] and .093 [2.36] diameters, can be inserted in a printed circuit board quickly and reliably by fully automatic or semi-automatic machinery.
(Check TTI Inventory)

valu_thumb.jpgVAL-U-LOK Connectors | TE Connectivity
The VAL-U-LOK connector system is a low cost, wire-to-wire or wire-to-board connector system on 4.2 mm x 4.2 mm centerline.
(More Info)

25mm-Signal-Double-Lock-Connectors-Tyco-Electronics.jpg2.5mm Signal Double Lock Connectors | TE Connectivity
With contacts on 2.5mm centerline, both wire-to-wire and wire-to-board connectors are available. The connectors consist of plug and cap housings for wire termination, double lock plates for plug and cap housings, crimp snap-in contacts, and a PC board-mount post header. A double lock plate is available for both plug and wire-to-wire cap housing to ensure positive loading.
(Check TTI Inventory)

ampduac_tyco_thumb.jpgAMP DUAC Connectors | TE Connectivity
The AMP-DUAC line offers a variety of wire-to-wire or wire-to-board connectors, featuring the DUAL-ACTION contact design that provides better lead-in and reduces contact mating forces. The AMP-DUAC PL-II connector is the newest in the family and offers a new position lock on both the power and signal contacts to ensure contacts remain in position in the cable receptacle.
(More Info)

te_ampmodu_200.jpgAMPMODU Mod I Connectors .200 Inch (.031 X .062) | TE Connectivity
The .200 Inch AMPMODU is a rugged wire-to-board, board-to-board discrete wire system featuring 0.031 x 0.062 posts. Posts available on strip for machine application directly to OPCB or in housings for board mounting.
(Request a Quote)

High-Density-Connectors-Tyco-Electronics.jpgHigh Density Connectors | TE Connectivity
High Density connectors includes MULTILOCK 040 III and high density hybrid connectors. MULTILOCK 040 III connectors feature different sizes of plugs to reduce connector insertion force, screw bolt for 80 position plug mating to secure, and an all copper contact. High density hybrid connectors feature an I/O connector with 040, 070 terminal.
(Check TTI Inventory)

MIC-Multiple-Interlock-Connectors-Tyco-Electronics.jpgMIC Connectors (Multiple Interlock Connectors) | TE Connectivity
MIC Connectors are a family of versatile nylon connectors designed for use in a wide range of applications from low level circuits to power circuits. In addition to their versatility, MIC Connectors have many outstanding features including reliable housing construction with positive locking and anti-scooping mechanisms for connector engagement, dual-beam cantilever spring design built into receptacle contacts, high resistance to vibration and shock. Other features include polarized housing design and double row contact cavities for ease of assembling. MIC Connectors comprise plug and cap assemblies for wire termination (free-hanging and panel mount types), board mount cap assembly and tab/receptacle contacts used for wire termination.
(Check TTI Inventory)

Pulse-Lock-Connectors-and-Contacts-Tyco-Electronics.jpgPulse Lock Connectors and Contacts | TE Connectivity
The Pulse Lock Connectors have many advanced design features for improved reliability. These include a mechanism for preventing half-mating of connector halves, capability of high density packaging, a box-shaped contact section to prevent contact deformation, no tangling of contacts and damage by scooping at mating/unmating, a positive connector housing with molded lances to retain contacts, and guide walls to ensure.
(Check TTI Inventory)

sl-156-connectors.jpgSL 156 Connectors | TE Connectivity
The SL-156 connector system is a wire-to-board system with contacts in a single row on .156 [3.96] centerline. It is designed for proper loading of contacts and has a contact retention feature to prevent back-out. SL-156 housings also mate with MTA-156 right angle and vertical mount headers.
(Check TTI Inventory)

amp_mini.jpgAMP-IN Terminals Mini | TE Connectivity
The miniature AMP-IN Terminal is designed not as an electrical terminal but as a mechanical holding device to enhance soldering of hookup wires to printed circuit boards. The combination of terminal and application tooling eliminates costly manual preparation of wires prior to soldering, and positions the wire to achieve reliable solder joints. Movement of the wire during soldering is restricted, assuring proper solder flow.
(Check TTI Inventory)