Printer Friendly

< 5 Amps/Circuit Product Family Overview | TE Connectivity

 

amp_barrel_thumb.jpg AMP BARREL Terminals | TE Connectivity
AMP-BARREL Terminals solve the problem of interconnecting discrete wires to printed circuit boards without permanently soldering them in place, and provide cost savings by eliminating the need for two-piece terminal systems, terminal strips or expensive space-consuming modular connectors. ( more info )

amp_ct.jpg AMP CT Connectors 2mm | TE Connectivity
The AMP CT Connector System consists of an extensive product offering and broad industry usage. The automatic harness-making system provides a range of harness styles using three types of 2 mm centerline connectors featuring round pins -- MT Connectors, MT AMP-IN Vertical Connectors and MT AMP-IN Horizontal Connectors. ( Check TTI Inventory )

img8931.jpgAMPMODU .100 Centerline Crimp Product Family Overview | TE Connectivity
( more info )

idc_crimp.jpgAMPMODU IDC & Crimp Product Family Overview | TE Connectivity 
( more info )

AMP-Standard-Timer-Connectors-Tyco-Electronics-1.jpg AMP Standard Timer Connectors (RAST 5 Appliance) | TE Connectivity
AMP Standard Power Timer contacts, for use with Standard Timer housings, are suitable for high-density and high-current carrying requirements. The modular connector system incorporates modern in-line mating technology on a 5 mm centerline, 2 to 12 positions, rowable with no loss of spacing and a variety of keying possibilities. ( more info )

mass_term.jpg Crimp Termination Connectors EI Series | TE Connectivity
AMP Mass Termination EI Series Connectors are wire-to-board connectors based on the unique mass termination technique which are designed for high density connection of wirings inside equipment, labor saving in assembling operations and high reliability. The connectors consist of a receptacle assembly for wire termination with receptacle contacts preloaded and a board mount post header to mate with the receptacle assembly. The post header is intermateable with AMP El Series connectors with crimp, snap-in contacts for wire termination. ( Check TTI Inventory )

ct.jpgCST II Connectors | TE Connectivity
The CST-100 connector system is a wire-to-board system with contacts in a single row on .100 [2.54] centerline. It is designed for proper loading of contacts and has a contact retention feature to prevent back-out. CST-100 housings also mate with MTA-100 right angle and vertical mount headers. ( Check TTI Inventory )

15mm-AMP-Mini-CT-Connectors-Tyco-Electronics.jpgCT Connectors 1.5mm AMP Mini | TE Connectivity
AMP Mini CT connectors are a miniature wire-to-board interconnect solution, which is similar to the standard AMP CT Connector Series that has proven performance in harness making capability. A variety of harness-making machines are available ranging from hand tools for low volume production to automatic crimping machines. Two types of housings are available, including Crimp and Mass Terminated (MT), which are preloaded with insulation displacement contacts. These connectors are designed with contacts on 1.5 mm pitch. ( Check TTI Inventory )

High-Density-Connectors-Tyco-Electronics.jpg High Density Connectors | TE Connectivity
High Density connectors includes MULTILOCK 040 III and high density hybrid connectors. MULTILOCK 040 III connectors feature different sizes of plugs to reduce connector insertion force, screw bolt for 80 position plug mating to secure, and an all copper contact. High density hybrid connectors feature an I/O connector with 040, 070 terminal. ( Check TTI Inventory )

High-Performance-Interconnects-Tyco-Electronics.jpg High Performance Interconnects (HPI) | TE Connectivity
The wire-to-board High Performance Interconnect (HPI) connector system is available in 1.0mm, 1.5mm, 2.0mm, 2.5mm and 3.96mm centerline pitch. This connector system offers vertical and horizontal (right angle) connector mounting for versatility and the square-peg technology enables this product to mate with many other like products in the industry. The single- and dual-row post headers are available in various colors to allow the customer the ability to color code their systems. The single-row connectors range from 2-16 positions while the dual-row connectors are available in 10, 20, 30 and 40 positions. ( Check TTI Inventory )

amp_metric.jpgMetric Interconnect System 2.5mm | TE Connectivity
AMP 2.5mm Metric Interconnect System is a compact level IV wire-to-board system which comprises Insulation Displacement Crimp and Crimp Type receptacle connectors and the mating PC Board vertical mount headers and MT AMP-IN header. This system has built-in locking and polarization features. ( Check TTI Inventory )

metri_thumb.jpgMetrimate Connectors | TE Connectivity 
AMP Metrimate connectors are true metric specification connectors designed for panel, free-hanging or pc board application. These connectors offer improvements in durability, density and electrical performance over competitive soft-shell pin and socket connectors. This versatile pin and socket connector line is designed to meet the general requirements of various testing and approval agencies, including UL, CSA, VDE and IEC. ( more info )

tycomicro.jpgMicro CPC Connectors | TE Connectivity
The new, higher pin-count design micro CPC connectors can optimize I/O efficiency of the system you are designing. They are suitable for applications in medical equipment, instrumentation, and industrial and test & measurement equipment. Two contact systems are available in wire-to-wire or wire-to-board or wire to panel versions. A spring-probe contact arrangement is also available. ( more info )

Serial-Bus-Connector-Block-Cable-Assemblies-Tyco-Electronics.jpg MICRODOT Serial Bus Connector Block & Cable Assemblies | TE Connectivity
The MICRODOT Serial Bus Connector Block connector system comes with a six port right-angle header for PCB mount or front bulkhead mount. The connector system consists of two 22 AWG power and four 24 AWG signal pin and socket contacts for data signal and power transmission. ( Check TTI Inventory )

micromatch_thumb.jpg Micro-MaTch Board-Board & Ribbon-Board Connectors | TE Connectivity
The AMP Micro-MaTch connector family, with its contact spacing of 1.27mm, fully complies with the electronic packaging requirements of today and the future. The system offers a range of board and wire connectors, enabling a variety of wire-to-board and board-to-board interconnections. ( more info )

micro_mnl_new.jpgMicro MATE-N-LOK Connectors | TE Connectivity
The Micro MATE-N-LOK 3mm Connector System is a wire-to-wire and wire-to-board connector system with contacts on a 3mm [.118] centerline. Both single row and double row configurations are available. Crimp, snap-in pin and receptacle contacts are used to terminate 24-20 [0.2-0.6] and 30-26 [0.05-0.15] AWG wire. Plug and receptacle housings allow wire-to-wire and wire-to-panel configurations. ( Check TTI Inventory )

1_5mm-Mini-VP-Vibration-Proof-Wire-to-Board-Connectors-Tyco-Electronics.jpgMini Vibration-Proof Connectors 1.5mm | TE Connectivity
1.5mm Mini VP Wire-to-Board Connectors are compact connectors for wire-to-board application. Designed on a "reversal" conception of using a receptacle header on the board side, the connectors provide contact pressure of more than two times the conventional one (35Og/terminal). Featuring an extremely high-density wiring with contacts on 1.5mm pitch and a very compact size with above-the-board height of 3.7mm, the connectors are ideally suited for use in all types of miniature equipment that require vibration resistance, such as servomotor encoders, small-sized portable telephones, PCs PDAs. ( Check TTI Inventory )

mta_connect.jpg MTA 100 Connectors | TE Connectivity
The MTA-100 IDC connector system is a wire-to-board and wire-to-wire system with contacts in a single row on .100 [2.54] centerline. The design features wire feed-through capability for daisy-chain applications. ( Check TTI Inventory )

multi_thumb.jpg Multimate Contacts | TE Connectivity
Multimate Contacts are a same style contact may be used in different connector housings, and many housings accept more than one type of contact. Allows the user to select the contact/housing combination best suited to the application, while keeping inventory costs to a minimum. Available in strip form for machine applications. Provides for lowest applied cost and loose piece form. ( more info )

mseries_thumb.jpgPin and Socket Connectors M Series | TE Connectivity
Connectors that intermate with other connectors made to MIL-C-28748 requirements. There is a wide range of styles and sizes: standard (unloaded), posted (preloaded), mixed, high voltage, and V.35. Positions range from 2 to 160. ( more info )