Printer Friendly

Two-Piece, High Speed (Right-Angle) Product Family | TE Connectivity

micro-strip_connectors.jpgMicro-Strip Connectors | TE Connectivity
AMP Micro-Strip connectors are a high density, controlled impedance connector family compatible with the requirements of high density and high speed data transmission technologies. Each signal line within the mated connector is located at a specific distance from an integral, separable bus bar serving as a ground plane in a micro-strip configuration. The selection of housing dielectric, spacing from signal contact-to-ground plane and conductor geometry provide a specific characteristic impedance plus very low inductance and capacitance.
(more info)

tyco_multibeam_thumb.jpgMULTIGIG RT Connector Products | TE Connectivity
The TE Connectivity MULTIGIG RT product line is a backplane interconnect family that offers flexibility and customization.
(more info)

STRADA_Whisper_Connector_sm.jpgSTRADA Whisper Connectors | TE Connectivity
The STRADA Whisper connector is the first of the next generation of high speed backplane interconnects offered by TE Connectivity with an industry leading data rate of up to 40 Gb/s. A revolutionary performance upgrade is a result of the extremely low noise characteristics of the individually shielded pairs which provides improved signal integrity and EMI performance over competitive products. The in-row "horizontal" pair orientation enables the STRADA Whisper to have zero skew.
(Request a Quote)

Z-PACK-HS3-Connectors_sm.jpgZ-PACK 2mm HM (Right Angle) PCB Connectors | TE Connectivity
The Z-PACK 2mm HM Hard Metric connector system is designed to meet the current and future needs of telecommunication, computer and instrumentation applications. It is a high performance, high density system with flexible configuration which offers upgradeability. The connector system is fully supported by our spice models to hel you choose the right product to match the application.
(Check TTI Inventory)

tycozpack_HM_sm.jpgZ-PACK HM-Zd PCB (Right Angle) Connectors | TE Connectivity
Z-PACK HM-Zd connectors are a high-speed, differential, board-to-backplane electrical connectors for the telecommunications and computer industries. It's an extension of the already established IEC 61076-4-101, Hard Metric connector family, however HM-Zd provides a differential solution for applications up to 12.5 gigabits/second.
(Check TTI Inventory)

Z-PACK-HS3-2mm-HM-Right-Angle-PCB-Connector-Tyco-Electronics.jpgZ-PACK HS3 2mm HM PCB (Right-Angle) Connectors | TE Connectivity
TE Connectivity's Z-PACK HS3 2mm Connectors are very high density, two-piece interconnection for applications requiring gigabit data rates, including servers, mass storage, and networking equipment. These connectors are optimized for high speed serial applications. Z-PACK HS3 Connectors support up to 4.8 Gb/s per differential pair, yielding an aggregate of 240 Gb/s per linear card edge inch (25mm).
(Check TTI Inventory)

Z-PACK-Slim-UHD_Connectors_sm.jpgZ-PACK Slim UHD Connectors | TE Connectivity
Z-PACK Slim UHD connector system is a flexible and upgradeable system designed to fit 15 mm (0.6 inch) slot pitch applications and above. The Z-PACK Slim UHD connector has an extremely high contact density combined with excellent high speed signal performance.
(Check TTI Inventory)

zpacktinmanov.jpgZ-PACK TinMan (Right Angle) Connectors | TE Connectivity
The Z-PACK TinMan connector offers a fully protected right-angle receptacle for use on daughtercards. This connector permits field repairability at either the module or single pin levels. Ground contacts positioned within each column of the connector, combined with unique contact lead frame arrangements, helps achieve low crosstalk and high through-put performance levels.
(Check TTI Inventory)