Slimline SATA connectors from FCI are designed to
enable connection of a “slimline” form factor drive to
the Serial ATA interface. The connectors comply with
the Serial ATA Specification issued by the Serial ATA
International Organization (SATA-IO) and are intended
for use at the electrical interface to Optical Disk Drive
The specification specially supports 9.5mm and 12.7mm slimline drives, and the connector design accommodates a latching option for these drives. Some consideration was given to an anticipated 7mm drive height, but a latching option may not be accommodated.
The connector is designed to fit the established PATA (Parallel ATA) connector slimline design with almost no changes to the slimline drive case, media tray, or internal mechanics. It is anticipated that a simple replacement of the PATA PC board with a SATA controller and connector in the present slimline drive designs may be possible.
The connector preserves the design of the signal portion of the present SATA connector and accommodates presently available SATA signal cables. Direct connect to a slimline SATA receptacle on a host board is also possible.