Printer Friendly

Honeywell Magnetic Position Sensors Family Overview

You know us as a leader. Whether you’ve known us as MICRO SWITCH™ or Honeywell Sensing and Control (S&C). In 1968, we revolutionized the industry with the first solid-state keyboard combining Hall-effect sensing and associated electronics in a single circuit. Today, the Honeywell S&C family of magnetic position sensors includes digital and analog Hall-effect position, magnetoresistive digital, Hall-effect vane, gear-tooth, and Halleffect basic switches and magnets. These high-speed, extended life sensors are often directly compatible with other electronic circuits, responding to the presence or the interruption of a magnetic field by producing a proportional output. Gear-tooth and other packaged Hall-effect speed and direction sensors sense movements of a ferrous metal target. Digital and analog “sensor-only” devices are operated by a permanent magnet or electromagnet, while actuation mode depends on the type of magnets used. A vane passing through a gap or a magnet mounted on a plastic plunger operates integral magnet position sensors.

TTI Featured Honeywell Position Sensors

Honeywell BiPolar Hall Effect SensorHoneywell BiPolar Hall-Effect Sensors SS30AT Series
The Honeywell SS30AT is a versatile, bipolar, Hall-effect sensor. These sensitive magnetic sensors offer reverse polarity protection and deliver stable output over a -40 °C to 125 °C [-40 °F to 257 °F] temperature range.
(View Honeywell BiPolar Hall-Effect Sensors SS30AT Series)

Honeywell Unipolar Hall Effect SensorHoneywell Unipolar Hall-Effect Digital Sensor 103SR Series
The Honeywell 103SR Series is a Unipolar Hall-Effect Digital Position Sensor with 15/32 in cylindrical aluminum housing; two hex nuts; 1 m [39.4 in] jacketed cable; current sourcing output; and Vdc supply voltage.
(View Honeywell Unipolar Hall-Effect Digital Sensor 103SR)

Honeywell Omnipolar Magnetoresistive SensorHoneywell Omnipolar Magnetoresistive Sensors 2SS52M Series
The Honeywell 2SS52M Series position sensors have magnetoresistive material integrated on silicon and encapsulated in a plastic package. The integrated circuit provides a digital output in response to very low magnetic fields.
(View Honeywell Omnipolar Magnetoresistive Sensors 2SS52M Series)

Honeywell Hall Effect Vane SensorsHoneywell Hall-Effect Vane Sensors 4AV Series
Honeywell AV vane operated integral magnet position sensors are operated by passing a ferrous vane through the gap between the Hall sensor and the magnet, shunting the magnetic flux away from the sensor.
(View Honeywell Hall-Effect Vane Sensors 4AV Series)

Honeywell Hall Effect Digital Position SensorHoneywell Hall Effect Digital Position Sensors SR13 Series
The SR13/15 Series package enhancements permit quick and easy sensor installation, increasing the usability of the SS400 Series.
(View Honeywell Hall-Effect Digital Position Sensors SR13 Series)

Additional Information

Honeywell Magnetic Sensors Line Guide