KEMET Evox Rifa Surface Mount Paper/Film Capacitors consist of one of four metallized materials; Polyester (PET), Polyethylene Naphthalate (PEN), Polyphenylene Sulphide (PPS), and Impregnated Paper. KEMET (Evox Rifa) SMP253 capacitors use a multi-layer metallized paper that exhibits excellent self-healing properties and transient handling capabilities. KEMET Evox Rifa SMP253 film capacitors have a high dielectric constant and high ionization level due to impregnated dielectric material. KEMET Evox Rifa SMP 253 capacitors have an outstanding reliability in mains connected and other low frequency applications. Evox Rifa SMP253 capacitors are intended to be used as interference suppressors in Y2 applications or line-to-earth.
Capacitor Construction:
KEMET Evox Rifa Paper film capacitors for surface mounting use a multi-layer metallized paper as the electrode with a rugged box encapsulated and impregnated in a self-extinguishing material that meets the requirements of the UL 94V-0.
Recommended Soldering Conditions:
KEMET Evox Rifa SMP 253 recommends reflow soldering on the top body surface of the capacitors only. Preheating the KEMET Evox Rifa SMP253 capacitor should not exceed 170°C. The time in which the KEMET Evox Rifa SMP253 capacitors are above 217°C should be limited to less than 50 seconds, with the peak temperature during the process never exceeding 240°C.
SMP253 |
|
KEMET Evox Rifa Impregnated Film Capacitors |
|
| International Standard | IEC 60384-14; EN132400 Line-to-Earth Y2 |
| Capacitance Range,μF: | 0.001 - 0.0047 |
| Capacitance Tolerances, ±% | 20 |
| Rated Voltage, VAC | 250 |
| Test Voltage (Factory test) | 3000 VDC |
| Climatic Category (IEC 60068) | 40/100/56/B |
| Pulse Rise Time, V/μs | 2000 |
| Chip Length, mm | 12.7 |
| Packaging | Taped for automatic insertion, bulk in boxes |
Part Builder |
View Datasheet |
Features & Benefits:
|
Applications:
|
< Back to KEMET Evox Rifa Capacitors