Printer Friendly

KEMET Tantalum Thru-Hole Dipped Capacitors

Part Number Information
Part #: Price/Availability:
UltraDip II
T350 Buy Now button
T351 Buy Now button
T352 Buy Now button
T353 Buy Now button
T354 Buy Now button
T355 Buy Now button
T356 Buy Now button
T368 Buy Now button
UltraDip III
T396 Buy Now button
T398 Buy Now button

Part Number Builder button UltraDip II Part Builder

Part Number Builder button UltraDip III Part Builder

KEMET logo

UltraDip II

The KEMET "UltraDip II" Capacitors offer the designer of quality instruments and entertainment systems the widely recognized advantages inherent in solid tantalum capacitors at competitive prices. The UltraDip II Series—miniature dipped solid tantalum capacitors—provide the designer with the advantage of compactness plus low leakage and low DF performance characteristics for filtering, bypassing, coupling, blocking and RC timing circuits. UltraDip II capacitors utilize the same sophisticated materials and processes which have advanced KEMET Electronics Corporation to the leadership position in solid tantalum capacitors. The plastic case provides a tough barrier coating and maintains precision of lead wire spacing within ±0.015 inch. The gold color epoxy utilized permits Laser marking with outstanding permanency and legibility. All case sizes are printed with capacitance, voltage, polarity, and vendor identification. Solid tantalum devices exhibit no degradation failure mode during shelf storage and show a constantly decreasing failure rate (i.e., absence of wear out mechanism) during life tests. The UltraDip II Series provides self-insulating cases which are resistant to shock and vibration. These capacitors exhibit low DCL, ESR and Impedance and have excellent temperature stability.

KEMET Ultra Dip II dimensions diagram

UltraDip III

KEMET "UltraDip III" Capacitors offer the advantages of solid tantalum construction and a fail-safe insertion mechanism. The three leaded design (the anode is in the center) enables operators to insert the capacitors into printed circuit boards correctly without having to visually determine polarity. This timesaving device also eliminates board damage that may result from incorrect insertion. These miniature dipped solid tantalum capacitors are encased in a tough plastic barrier coating that maintains the precise lead wire spacing within ±0.015 inch. The gold color epoxy permits laser markings with outstanding permanency and legibility. All case sizes are printed with capacitance, voltage and vendor I.D. The UltraDip III Series from KEMET Capacitors exhibit low DCL, ESR and Impedance and have excellent temperature stability. These capacitors may be ordered with precut leads (see drawing for lengths) or in KEMET Capacitor ARIS packaging (leads taped and on reels) for high speed automatic insertion equipment.

These parts are now RoHS compliant.

KEMET Ultra Dip III dimensions diagram
UltraDip II & III Characteristics:
Case Sizes Available*: A, B, C, D, E, F, G, H, J, K, L, M
Voltages Available: 3V, 6.3V, 10V, 16V, 20V, 25V, 35V, 50V
Capacitance Tolerances: ±10% (special order only on Ultra III), ±20%
Operating Temperature: -55°C to +85°C at full rated voltage
125°C at 2/3 rated voltage of 85°C
Lead Material: Standard (Sn/Pb), 100% Tin
*As designated by the Electronics Industry Association

Additional Information:

KEMET Tantalum Through Hole Capacitors (PDF)

< Back to KEMET Capacitors