Printer Friendly

Temp-Flex® Specialty Wire and Cable Products | Molex

Tempflex

Temp-Flex manufactures specialty wire and cable, and invests heavily in research and development to provide technological solutions to a wide variety of specialty markets. To ensure product quality and consistency, Temp-Flex is a fully equipped on-site manufacturing facility. An extrusion process is employed using fluoropolymer insulation with a concentration on thin walls for the medical industry and faster speeds in the electronics industry. Typically designed for extreme conditions and harsh environments, all Temp-Flex product lines adhere to RoHS compliancy standards.

Image Product Name Features Datasheet

Micro Miniature Wire and Cable

MediSpec_Micro_Miniature_Coils_sfi.jpg MediSpec™ Micro Miniature Coils (MMC) -Continuous length coils
-Optional outer jacket
-Stacked tolerances to ± 0.0254mm (0.001”)
Datasheet
High_Density_Ribbon_Cable_sfi.jpg Temp-Flex® MediSpec™ High-Density Micro-Ribbon Cables -High density
-Tight pitch tolerance ± 0.0127mm (0.005”)
-Lower dielectric constant than flex circuits
Datasheet
Temp_Flex_Micro_Extrusion_sfi.jpg Temp-Flex® MediSpec™ Micro Extrusion Primary Wires -Pin-hole free insulation
-Biocompatible materials
-Tight tolerance down to 5% wire OD
Datasheet
Temp-Flex_MediSpec_Micro_Coaxia_Cables_sfi.jpg Temp-Flex® MediSpec™ Micro Coaxial Cables -Robust and flexible dielectric
-Alternative to PTFE and ePTFE tape wrapped constructions
-OD down to 0.24mm (0.0093”)
Datasheet
Temp_Flex_Twisted_Pair_sfi.jpg Temp-Flex® Twisted Pair -Pin-hole free insulation
-Biocompatible materials
-Tight tolerances down to 5% wire OD
N/A
bundled_cable_sfi.jpg Temp-Flex® Bundled Cable -Cabling our competencies into a robust solution
-Highly customizable
N/A

Coaxial Cable

Temp-Flex_Air_Dielectric_sfi.jpg Temp-Flex® Air-Dielectric Ultra-Low-Loss Flexible Microwave Coaxial Cables -Shield OD down to 0.84mm (0.033”)
-85 to 88% Velocity of Propagation (VoP)
-Flexible
Datasheet
Temp-Flex_Solid_Core_Low_Loss_Microwave_Coaxial_Cables_sfi.jpg Temp-Flex® Solid-Core Low-Loss Microwave Coaxial Cable -Shield OD down to 0.104mm (0.041”)
-70% Velocity of Propagation (VoP)
-Flexible
Datasheet
temp-flex_standard_coaxial_cable_cut_out_sfi.jpg Temp-Flex® Standard Coaxial Cable -Flexible melt extruded dielectric
-OD down to 0.84mm (0.033”)
-Air enhanced dielectric optional
N/A
Flexible_Microwave_Cable_Assemblies_smi.jpg Flexible Microwave Cable Assemblies -Cable Type: Solid-Core Low-Loss; Air-Dielectric Ultra-Low-Loss
-Connector Type: SMPM, SMP, SMA, 2.92mm, Type N, TNC and more
-Configurations: Standard and CustomM
Datasheet

Bundled Cable

Temp_Flex_Twisted_Pair_sfi.jpg Temp-Flex® Twisted Pair -Pin-hole free insulation
-Biocompatible materials
-Tight tolerances down to 5% wire OD
N/A
bundled_cable_sfi.jpg Temp-Flex® Bundled Cable -Cabling our competencies into a robust solution
-Highly customizable

Flat Ribon Cable

FEP_Flat_Ribbon_Cable_sfi.jpg Temp-Flex® FEP Flat Ribbon Cable -Pitch Control to ± .002” (.0508 mm)
-Compatible with wide range of IDC’s
-Durable FEP (Fluorinated Ethylene Propylene)
More Info

Additional Information: