• Home
• >
• Products
• >
• Product Types
• >
• Wire & Cable
• >
• EXTreme MicroPower™ Header | Molex

Designed for high-current density applications, Molex's EXTreme MicroPower header is soldered directly to PCBs such as a Voltage Regulator Module (VRM) or a mother-board using a slotted via. With a current rating of 16.0A per blade at 30° T-rise, Micro-Max Power may be used in any board-to-board application where power transfer is needed through a non-separable interface in a compact design.  EXTreme MicroPower headers are available in circuit sizes ranging from 4-to-24 blades in a single-row configuration. Optional voided circuits are available to allow for use in high-voltage applications.

Features & Benefits:

• 4.17mm (.164) connector height off the PCB
  • Low-profile design enhances system airflow
• Non-separable interface
  • Allows for higher-current and greater density capability with lower resistance plane-to-plane compared to similar products with separable interfaces or standard stick headers
• Compact size
  • Improves airflow and saves PCB space
• Optional voided circuits
  • Design flexibility for high-voltage applications
• Two blade lengths available
• Accommodates 1.57 to 2.36mm (.050 to .093) PCB thickness
• Reliable and compact where change-out is not needed
• Easily adaptable to many applications
• Saves PCB space on small cards and tight mounting envelopes

Applications:

• VRM modules or any application for point-of-load power transfer
• Small Form Factor (SFF)
  • PCs
  • workstations
  • servers
  • routers
  • switches

Additional Information:

• Datasheets