• Home
• >
• Products
• >
• Product Types
• >
• Wire & Cable
• >
• Mini-Fit® CPI | Molex

When you specify Mini-Fit, you specify a complete family of interconnection products that give you maximum design flexibility. And now Mini-Fit CPI expands this family by adding headers with a highly reliable, compliant pin "eye of the needle" design.

These press-fit headers eliminate soldering, which lowers the applied costs associated with:  expensive, government-mandated, lead-free solders; pre- and post-solder cleaning treatments; rework due to faulty solder joints; and PC board strain/warping caused by high solder temperatures. 

For all your applications. Mini-Fit CPI headers can be specified for both board-to-board and wire-to-board applications, allow up to 8 amps maximum per circuit and are available in 4, 6, 10, 14, 18, and 24 circuits.

Features & Benefits:

• Compatability with all Mini-Fit, Jr.™ or Mini-Fit, BMI™ receptacles
• Beveled, lead-in housings for blind mating
• Designed for multiple board thicknesses of .094 inch and greater
• Blind mating vertical header
• Press-fit pin requiring no soldering

Applications:

• For all your applications. Mini-Fit CPI headers can be specified for both board-to-board and wire-to-board applications, allow up to 8 amps maximum per circuit and are available in 4, 6, 10, 14, 18, and 24 circuits.
  • Board-to-board
  • Wire-to-board

Additional Information:

• Mini-Fit CPI Headers Brochure