Printer Friendly

DC-DC Converter MPDRX303S | Murata

MPDRX303S | Murata

The MPDRX303S provides 20mVp-p ripple voltage spec and sits low on the assembly board (7mm). The wide input voltage spec (5.6 ~ 14V) allows implementation in all intermediate bus architectures where 9 ~ 12 volt bus lines are commonly available with little regulation. The programmable output voltage of 1.6 ~ 3.63V provides flexibility to designers for a variety of solutions to meet the point of load supply requirements. The 26 Amp current rating provides a capacity to meet many load current needs.

Features & Benefits:

  • POL non-isolated DC-DC converter
  • Low-profile (7mm MAX)
  • Wide Input Voltage (5.6-14V)
  • Wide Output Voltage (1.6-3.63V)
  • 26A Output Current (MAX)
  • Very High Speed Response
  • Short circuit protection available
  • On/Off control function available
  • Two power good signal output terminals
  • Variable start-up speed (by external capacitor)

Applications:

  • Data Networks
  • Enterprise Networks
  • Telecommunications Equipment
  • Industrial
  • Process Equipment

Additional Information: