The sleek TermiMate™ wire-to-board and board-to-board system minimizes shadowing in LED lighting applications while providing space savings and reduced component costs
Eliminate same-circuit-size cross mating, optimize space savings and reduce terminal back-out with low mating force, high-density Ultra-Fit™ Power Connectors
Offering a robust solution for miniature IDC Wire-To-Board connections
N-Type connectors are designed to satisfy the need for a durable, weatherproof, medium-size RF connector with consistent performance through 11 GHz.
The SMP interface is a subminiature interface in the same scale as MMCX connectors but offers a frequency range of DC to 40 GHz. It is commonly used in miniaturized high frequency coaxial modules and is offered in bot...
The AFI connector series is a solution for board-to-board RF applications, especially for the military and broadband marketplaces.
The MCX (Micro Coaxial) series is a 50 Ω series with broadband capability ranging from DC to 6 GHz. In addition, the MCX series features secure, fast and easy snap-on/ snap-off coupling.
High durability spring clips offer smartphone makers maximum cost savings with superb interconnect performance over a wide working range.
The compact design permits dense connector packing and makes them ideal solutions to applications where space limitation is a factor.
The MMCX (Micro-Miniature Coaxial) connector series is a micro-miniature version of the MCX.
These connectors provide superior performance for both return loss and intermodulation distortion (IMD).
The QMA connector is a quick disconnect version of the SMA connector and shares the same internal construction, which allows the connector to have excellent performance up to 6 GHz.
The rugged ML-XT™ connection system with market-leading high-performance seal technology is a cost-competitive solution offering superior reliability for critical vehicle-wiring applications in harsh environments.
A wide range of sensor connectors are available in M8 and M12 connector sizes. The connector cord sets will fit both photoelectric, proximity and other sensors. Omron offers a complementary and comprehensive family of...
We can recommend the right cable material for your application.
Delta BNC series connectors are compact, economical, 50-ohm impedance connectors with two-stud bayonet coupling. These connectors conform to MIL-PRF-39012, and are available with silver, nickel, or Albaloy plating.
A wide variety of adapters within each connector series.
MIL-DTL_5015 connectors are recommended for a wide range of applications, from commercial/ industrial and mass transportation systems to the most stringent high reliability defense and aerospace requirements.
MIL-DTL-38999 Series I is a bayonet coupling subminiature configuration with high contact density, ideal for smaller wire gauge, general-purpose applications.
MIL-DTL-83723 Series III family offers connectors with bayonet and threaded coupling including lanyard-release quick-disconnects. These connectors combine the best features of MIL-DTL-26500 and NAS 1599 miniature conn...
These connectors were designed for military and commercial applications where the prime requirements are lower profile and lighter weight.
MIL-DTL-26482 Series 2, bayonet coupling, rear-removable crimp contact connectors were designed as an upgrade to MIL-DTL-26482 Series 1. Series 2 connectors are intermountable and interchangeable with both solder and ...
These high performance Subminiature Modular Plug-in style microwave connectors allow devices to be connected in a modular fashion, without the need for cables or threaded coupling mechanisms.
Delta TNC series connectors are compact, economical, 50-ohm impedance connectors with 7/16-28 threaded coupling (similar in size to BNC connectors, but with better electrical characteristics). These connectors conform...
These extended-frequency, precision SMA series connectors feature maximum VSWR of 1.15:1 from DC to 18 GHz, and 1.25:1 from 18 to 26.5 GHz.
Cannon MDM-PCB connectors are designed for use with flex circuitry, flat cable and printed circuit boards or multi-layer boards. They use the standard MDM metal shell and provide high density and high reliability in b...
ITT Cannon Miniature Circular series KPT and KPTB (thru-bulkhead) provides a broad range of general purpose solder cup connectors. Cannon connectors are compatible with all MIL-C-26482 and VG95328 connectors with corr...
Cannon MDM connectors are used in applications requiring highly reliable, extremely small, lightweight connectors with higher density contact configurations than available in traditional rectangular connectors. There ...
General purpose environmental miniature connectors featuring high contact density, superior EMI shielding and 500 hours corrosion resistance. Military qualified to Mil-DTL 38999.
ITT Cannon Military/High Reliability D Subminiature connectors are used in many applications. Being the inventor of the D Subminiature connector, ITT Cannon is able to use its extensive design expertise and high quali...