Printer Friendly

PhotoMOS 8 Pin Relays | Panasonic

AQW Series

AQW DIP 2DIP 2 Form A
High cost-performance DIP8-pin type with reinforced insulation. More than 0.4 mm internal insulation distance between inputs and outputs. Con-forms to EN41003, EN60950 (reinforced insulation). PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. Can control max. 0.14 A load current with 5 mA input current. Fast operation speed of type. 0.5 m(AQW210EH).
(Datasheet)
(Part Builder)

AQW DIP 2DIP 2 Form A 60V to 600V
Compact DIP8-pin type of 60V to 600V load voltage. The device comes in a compact (W) 6.4 × (L) 9.78 ×(H) 3.9 mm (W) .252×(L) .385×(H) .154 inch, 8-pin DIP size (through hole terminal type).
(Datasheet)
(Part Builder

DIP 2 Low HighDIP 2 Form A Low High Sensitivity
DIP8-pin type featuring low on-resistance with 400V load voltage. Can control max. 0.16 A load current with 5 mA input current. Low on-resistance of typ. 10.2Ω.
(Datasheet)
(Part Builder)

DIP 2 Low HighDIP 2 Form B
Normally closed DIP8-pin economic type with reinforced insulation. More than 0.4 mm internal insulation distance between inputs and outputs. Con-forms to EN41003, EN60950 (reinforced insulation).
(Datasheet)
(Part Builder)

DIP 2 Low HighDIP 2 Form B Low On Resistance
Normally closed (2 Form A) DIP6-pin type Low on-resistance with 400V load voltage. Has been realized thanks to the built-in MOSFET processed by our proprietary method, DSD (Double-diffused and Selective Doping) method.(Datasheet)
(Part Builder)

DIP Current LimitingDIP Current Limiting
Two output type with current limiting and reinforced insulation. To control an over current from flowing, the current limit function has been realized. It keeps an output current at a constant value when the current reaches a specified current limit value.
(Datasheet)
(Part Builder)

Dip 2 Form BDIP Form A and B
Both NO and NC contacts incorporated in a DIP8-pin package. Approx. 1/2 the space compared with the mounting of a set of 1 Form A and 1 Form B PhotoMOS relays. Applicable for 1 Form A 1 Form B use as well as two independent 1 Form A and 1 Form B use.
(Datasheet)
(Part Builder)

DIP A and BDIP Form A and B Low Power Consumption
Both 1 Form A and 1 Form B contacts incorporated in a compact DIP8-pin with low on-resistance. Applicable for 1 Form A 1 Form B use as well as two independent 1 Form A and 1 Form B use. PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion.
(Datasheet)
(Part Builder)

Dip 2 Form BDIP Form A and B Reinforced Insulation
Both NO and NC contacts incorporated in a compact DIP8-pin Reinforced insulation. 60V type couples high capacity (0.5A) with low on-resistance (typ. 1Ω). More than 0.4 mm internal insulation distance between inputs and outputs. Conforms to EN41003, EN60950 (reinforced insulation).
(Datasheet)
(Part Builder)

DIP Low ResistanceDIP Low On Resistance
DIP8-pin type featuring low on-resistance with 200V/400V load voltage. 2-channels (Form A) type with high response speed, low leakage current and low on-resistance. The capacitance between output terminals is small; typ. 10 pF. This enables for a fast operation speed of typ. 0.2 ms.
(Datasheet)
(Part Builder)

RF SO High Load VoltageRF SOP 2 Form A High Load Voltage
Miniature SOP8-pin type featuring low C×R with high load voltage of 250V. With high load voltage of 250V, low output capacitance and low onresistance. Output capacitance (Cout): 33 pF (typ.). On-resistance (Ron): 11Ω (typ.).
(Datasheet)
(Part Builder)

RF SO High Load VoltageSOP 2 Form A
Miniature SOP8-pin type featuring low C×R with high load voltage of 250V. With high load voltage of 250V, low output capacitance and low onresistance. Output capacitance (Cout): 33 pF (typ.) On-resistance (Ron): 11Ω (typ.).
(Datasheet)
(Part Builder)

SOP Form A BSOP Form A and B
Both NO and NC contacts incorporated in a small SOP8-pin package. Normally open and normally closed contacts in a SOP package. The device comes in a miniature SOP measuring (W) 4.4 × (L) 9.37 × (H) 2.1 mm (W) .173× (L) .369× (H) .083 inch - approx. 38% of the volume and 66% of the footprint size of DIP type.
(Datasheet)
(Part Builder)

RF SO High Load VoltageSOP Low On Resistance and High Load Voltage
Miniature SOP8-pin type featuring low C×R with high load voltage of 250V. With high load voltage of 250V, low output capacitance and low onresistance. Output capacitance (Cout): 33 pF (typ.). On-resistance (Ron): 11Ω (typ.).
(Datasheet)
(Part Builder)

RF SO High Load VoltageSOP RF 2 Form A Low On Resistance
Miniature SOP8-pin type featuring low on-resistance with 200V load voltage. 2-channel (Form A) in SOP8-pin package miniature. (W) 4.4 × (L) 9.37 × (H) 2.1 mm (W) .173 × (L) .369 × (H) .083 inch -approx. 38% of the volume and 66% of the footprint size of DIP8-pin.
(Datasheet)
(Part Builder)