Printer Friendly

IHLP6767 and IHLP2020 Series Power Inductor | Vishay

Part Number Information
Part #:Price/Availability:
IHLP2020 BZERRBuy Now button
IHLP6767 GZERRBuy Now button
IHLP2020 CZERBuy Now button
Vishay logo
IHLP Power Inductor | Vishay

The IHLP6767GZ (17 mm X 17 mm X 7.0 mm) is the largest, highest current composite SMD power inductor on the market. With standard inductance values up to 22 µH and current handling capability out to 100 A, this AEC-Q200-qualified component is perfect for high-filter applications or dc-to-dc converters.

The IHLP2020 series (5 mm X 5 mm X 3.0 mm) is a cost-effective alternative to the IHLP2525 series. This inductor is one-third smaller than the standard IHLP2525, yet handles approximately 85% as much current as the larger part. This IHLP2020 is also available in 2.0-mm and 1.2-mm profiles for low- profile applications where a high-current filter or dc-to-dc energy storage inductor is needed.

IHLP® Inductor Loss Calculator Tool

Vishay’s new “IHLP Core Loss Calculator” is a free tool that assists designers in selecting the proper IHLP inductor based on the operating conditions of their circuit. This tool will simulate the losses in the inductor, including core and both AC and DC copper losses. The temperature rise and final component temperature will also be predicted based on the estimated losses. This tool will allow designers to compare several different inductors, both in size and value, to assist in the selection process. The calculator can be used for buck, boost and buck/boost style converters.

The calculator requires only six inputs: input voltage, output voltage, output current, frequency, ambient temperature and inductance. The calculator will do the rest based on these inputs. Inductance can be selected by using the “radio” buttons on the left hand side.

All designs should be verified in circuit as this tool is for simulation only.

Features & Benefits:

  • IHLP6767GZ
    • Inductance Values from .22 µH – 22 µH
    • Frequency Range up to 2 MHz
    • Shielded Construction
    • Saturation Current from 23A – 129A
    • Typical DCR from .63 mΩ – 25.1 mΩ
    • Max DCR from .66 mΩ – 26.5 mΩ
    • Operating Temperature Range of 55 °C to +125 °C
  • IHLP2020
    • Ultra-low Profiles from 1.2mm – 3.0mm
    • Inductance Values from .047 µH – 22 µH
    • Frequency Range up to 5 MHz
    • Shielded Construction
    • Saturation Current  from 4A – 45A
    • Typical DCR from 2.6 mΩ – 250 mΩ
    • Max DCR from 2.9 mΩ – 260 mΩ
    • Operating Temperature Range of 55 °C to +125 °C

Applications:

  • Servers
  • Graphic Cards
  • Automotive Systems
  • Power Supplies
  • Point of Load Converters
  • Field-programmable gate arrays (FPGA’s)
  • DC-to-DC Converters in Distributed Power Systems
  • High Current Buck and Boost Converters

Additional Information: