Vishay Through Hole Precision Resistors
TTI features the following Product Families that relate to Through Hole Precision Film/Foil Resistors.
|
PRECISION FILM |
|
 Type RN (CMF Military)- Metal Film Resistor, Military, MIL-R-10509 Qualified
Vishay Dale Type RN resistors feature very low noise (- 40 dB), very low voltage coefficient (5 ppm/V), and a controlled temperature coefficient. These resistors offer a flame retardant epoxy coating that prevents component failure due to fire. Commercial alternatives to military styles are available with higher power ratings. (View Datasheet)
|
|
 CMF Industrial Series - Metal Film Resistor, Industrial
Vishay Dale CMF Industrial resistors come in small size, and conformally coated. These resistors feature excellent high frequency characteristics and exceptionally low noise; typically 0.10 µV/V. CMF resistors have a low voltage coefficient of ± 5ppm/Volt. Special tolerance and or TC matching is available on request. (View Datasheet) (Check TTI Inventory)
|
|
 PTF Series - Metal Film Resistor, Ultra-high Stability
Vishay Dale PTF metal film resistors feature an extremely low temperature coefficient of resistance as well as low noise and voltage coefficient. A proprietary epoxy coating provides superior moisture protection. These resistors offer very good high frequency characteristics, and can replace wirewound bobbins. Applications include precision test equipment and instrumentation. (View Datasheet) (Check TTI Inventory)
|
|
 Model FHV - High Voltage Resistor
Vishay Techno Model FHV resistors feature a non-inductive design, with matched sets and ratio dividers available. Low Temperature Coefficients of ± 200 PPM/°C standard, ± 100 PPM/°C and ± 50 PPM/°C are available. Tolerance of ± 10 %, ± 5 %, ± 2 %, ± 1 % are standard options. These resistors can be used in high voltage, voltage dividers, ultra-high-power, high-power, and lighting applications. (View Datasheet) (Check TTI Inventory)
|
|
PRECISION FOIL |
|
 S102C/S102K Series - High Precision Foil Resistor
Vishay BMF Model S Series offers low TCR, excellent load life stability, tight tolerance, fast response time, low current noise, low thermal EMF and low voltage coefficient, all in one resistor. The S Series is virtually insensitive to destabilizing factors. The resistor element is a solid alloy that displays the desirable bulk properties of its parent material, thus it is inherently stable and noise free. (View Datasheet) (Check S102C/S102K Inventory)
|
|
 VTA Series - Bulk Metal® Foil Technology Tubular Axial Leaded Resistor
Vishay VTA series of axial leaded resistors are made using the same foil technology as the S102C. The difference is axial versus radial leads. Axial leads have the advantage of readily available auto insertion equipment while the radial leaded devices may require additional tooling. The VTA series has a resistance range from 5Ω to 500KΩ, and a Temperature Coefficient of Resistance of ± 8ppm/°C (– 55°C to + 125°C) and ± 4ppm/°C (0 to + 60°C). (View Datasheet) (Check TTI Inventory)
|
|
 VPR
Precision Foil Power Resistors in TO-220 Configuration, 4 Lead Kelvin Connected Device - Highly Recommended for Precision Applications ≤ 100Ω. (View Datasheet) (Check TTI Inventory)
|
|
 Z201 Series - Ultra High Precision Z-Foil Resistor
Vishay Z201 Z-foil resistor series is the third in a series of ultra-precision resistors since the first Bulk Metal foil resistor was introduced by Vishay in 1962. Its nominal TCR was reduced to -0.2 ppm/°C from -55°C to +25°C and +0.2 ppm/°C from +25°C to +125°C. This is a five-fold TCR improvement over the best previously available foil resistor and a ten-fold improvement over standard foil resistors. (View Datasheet) (Check TTI Inventory)
|
< Back to Vishay Products
