Browse Our Online Inventory: Check Availability, View Pricing, Order Parts
Electromagnetic Components (EMC)
TTI has steadily grown to become the world’s leading passive and connector specialist in the electronic component industry. TTI maintains an extensive inventory and offers the best electromagnetic choices in the industry, meeting almost any requirement of our customers. The company’s basic strategy is to focus on a specific range of products and strive to be the industry’s leading distributor. No other company offers the unique combination of benefits that TTI provides. We maintain an extensive inventory of electromagnetic components from the industry's finest manufacturers.
The team of specialists at TTI has more experience in the EMC product area than any other distributor. All TTI employees participate in company-wide training programs, which have helped create the most product-knowledgeable team in the industry. Additionally, customers can rely upon the TTI sales team as a valuable resource of information and guidance.
Featured EMC Products
Murata / TOKO DFE Series Metal Alloy Inductors are low profile inductors that use magnetic iron powder to ensure the capability for large current and flat wire for low DC resistance.
Murata / TOKO FDSD Fixed Metal Alloy inductors have a magnetically shielded construction that offers low DC resistance.
TDK Corporation offers a large selection of cutting-edge EPCOS brand Ferrites Cores and Accessories.
Vishay Dale IFCB thin film inductors are designed to provide stable inductance during high-frequency operations in communication devices such as cell phones, GPS devices, and wireless LANs, as well as for VCO, TCXO circuit, and RF transceiver modules. The IFCB-0402 provides inductance values ranging from 1.0 nH to 22 nH, while the IFCB-0603 is available in a range of values between 1.0 nH and 68 nH.
// Posted by:
Dennis M. Zogbi
The automotive cockpit electronics market is undergoing a transition to greater electronic content over the next five years with values increasing by a cumulative rate of an estimated 60%. Significant expansion is expected in connectivity, HUD and telematics as is shown in Figure 1 below.
// Posted by:
Dennis M. Zogbi
There are many specific sub-segments of the global ceramic capacitor market. It is possible to look at the market from the perspective of high voltage, high frequency, high temperature; or specific harsh environment component operation. Paumanok takes a granular approach to these segments because they are the most profitable, the most fragmented and the most difficult to understand, not only for those actively participating but especially for those mainstream ceramic capacitor manufacturers wishing to enter advanced capacitor markets. Microwave ceramic capacitors represent only 2% of the global market for ceramic capacitors, but have significant profitability and growth potential. Keep reading...
// Posted by:
Dennis M. Zogbi
The market for aluminum electrolytic capacitors was difficult in FY 2015 due to a sluggish market environment in TV set and home theatre equipment, as well as in the desktop and computer markets. However, the screw terminal and snap-in aluminum capacitors consumed in inverters in renewable energy systems in Europe showed selected signs of improvement. There was also global upturn in demand for aluminum capacitors consumed in automotive electronics and for specific applications in wireless base stations, and in industrial machine tools and robotics. Keep reading...
Electromagnetic components are available at TTI Inc. from industry leading manufacturers. TTI is an authorized distributor for many manufacturers including: API Delevan, EPCOS, J.W. Miller,
Murata Electronics, Pulse and Vishay/Dale.
Common Mode Choke
The common-mode inductor
, or common mode choke (CM choke), is a passive electronic component used to remove EMI. Common-mode chokes are designed for high-speed applications, for switch-mode power supplies and DC power lines, circuits with poor or no grounding, and circuits with signal and noise that are "mixed", or pretty much on top of each other. This device is designed specifically for its unique frequency-selective properties, and the windings are designed for EMI suppression effectiveness. Two windings are precisely wound on a common magnetic core, and the result is a device that can scrub out noise that is "very close" to your desired frequency, and return a clear and balanced signal.
is a length of conductor, normally wire, wound into a coil (thus the nickname that some people call this device) and around a core to concentrate the magnetic force (field) and maximize the inductance. The more turns of wire in the coil, the higher the inductance value. Inductors can be found in all facets of electronic design so they are not specific to one application area. Its primary properties are to resist changes in AC (alternating current) and to store and release energy from its magnetic field.
can be made from one of two different cores, ceramic (air core) or ferrite. These inductors, when made in a ceramic core, usually possess high SRF’s and current ratings for higher frequency applications. When made in a ferrite core, the part will be naturally shielded and typically will have higher inductance values and higher Q factors at lower frequencies.
Thin Film Inductors
Thin film inductors
are the tightest tolerance inductors made. These are made specifically for High Q and high current characteristics within high frequency and lower inductance applications. Normally this would include RF and wireless applications including but not limited to the following applications: Bluetooth, Telecom Market, GPS, PDA, cellphones, etc. Typically they are used for impedance matching on your RF circuit. Another use for thin film inductors is for creating a resonant circuit (tuning a circuit).
are the most versatile of the three technologies when it comes to their use in applications. This category of inductors includes not only chip inductors, but also all leaded inductors as well. A wirewound inductor will have the option to be magnetically shielded or not which helps it control unwanted signals from interfering with other components on the board especially important in filtering applications.