AT Strain Relief

Amphenol Sine
Part Number Information
Part #: Price/Availability:
AT06 Buy Now
AT04 Buy Now

The AT Strain Relief Series’ specifically designed wire cavities protect each individual wire seal, eliminating stress on the rear seal, maintaining IP67 sealing performance regardless of wire bundle direction or improper installation. It is a cost-effective and highly-reliable solution for wire routing, strain relief and sealing issues common in Heavy Duty applications. It ensures a complete environmental seal and necessary strain relief on the production line and in the field.


  • Size 16, 13A (max)
  • Size 16 contacts will accept wire ranges of 14 thru 20AWG
  • Operating temperature range: -55°C to +125°C at rated current
  • Meets or exceeds 1500 volts minimum
  • Shall not become detached or loosened when placed at 750mm and dropped to concrete eight times
  • No latch disengagement or discontinuity shall be the result when subjected to 50 g’s in each of three axis (X, Y & Z)
  • Continued continuity without degradation to mechanical or physical attributes following vibration. (max acceleration 20 g’s at Sine sweep of 10-2000Hz)
  • When subjected to a direct pull, contacts achieve a minimum pull-out force of 25 lbs.
  • A mated connector subjected to a pulling force by the exiting wire bundle at 25 lbs. times the number of contacts to a maximum of 100 lbs. applying load for 30 seconds
  • Subjected to 10 cycles at -55°C to +125°C with no cracking, chipping or other damage detrimental to the normal operation of the connector


  • Marine
  • Off-Road Vehicles
  • Agriculture
  • Heavy Equipment
  • Diagnostic
  • Military
  • Alternative Energy