Harwin EMC Shielding Contains EMI and RFI in a Snap

Harwin offers a broad range of EMC Shielding Solution products that simplify the process of protecting board level components from electromagnetic and radio frequency interference. Harwin’s EMC shield clips are ready for automated placement and secured during the SMT phase of production. When combined with Harwin’s 5-sided Shield Cans made of nickel silver the need for soldering is eliminated which decreases cost, saves time and prevents thermal damage. The comprehensive line of Harwin Spring Contacts allow shielding and/or grounding of antennas and other general electrical connections. They are packaged on tape and reel ready for automated placement and come in a variety of sizes, configurations and specification capabilities.

EMC Shield Can Clips

  • Assembled at the Same Time as All
  • Other SMT Components on the Board
  • Wide Range of Sizes for Different Can Thickness
  • Low Profile Options for Minimal
  • Height Cans
  • Variety of Insertion Forces
  • Improves Signal Integrity

EMC Shield Cans

  • Eliminates Hot Spots Due to Hand Soldering
  • Cans are Assembled with a Simple Push Operation
  • Simplifies Rework and Maintenance
  • Single-piece Construction Saves Costs Over Complex Fence-and-lid Cans

EMC Spring Contacts

  • Low-Profile and Positive Stop Contacts
  • Accommodates Both Wiping and Sliding Actions
  • Packaged in Tape and Reel for Auto Placement
  • Ideal for Blind Mating Applications
  • Horizontal and Vertical Contacts
  • Ranging from 1.23mm to 7.25mm Free Heights

EMC Shield Can Clips

  • Material: Beryllium Copper, Titanium Copper or Cupro-Nickel Alloy – Tin (over Nickel) Finish
  • Shield Thickness: 11 Product Options 0.17mm to 1.00mm
  • Height, Length: See Individual Product
  • Retention Force: See Individual Product

EMC Shield Cans

  • Material: Nickel Silver, Unplated
  • Shield Thickness: 0.2mm or 0.3mm (3 Sizes in Each)
  • Shield Heights: 5mm (0.3mm Thickness), 3mm or 2.5mm (0.2mm Thickness)
  • Design: 5-sided Box

EMC Spring Contacts

  • Material: Phosphor Bronze or Titanium Copper – Gold or Tin (over Nickel) Finish
  • Free Heights: 1.23mm to 7.25mm
  • Working Heights: 0.89mm to 6.35mm
  • Contact Types:
    • Antenna Contact with Positive Stop
    • Antenna Contact - Extended C Style
    • Spring Contact - C style
    • Spring Contact - Box Style (Protected Tip)
    • Spring Contact - Multi-Directional (Can be Used in Either Vertical or Horizontal Orientation)