High Voltage with Flexible Termination System (HV FT-CAP)

Part Number Information
Part #: Price/Availability:
C0805X Buy Now
C1206X Buy Now
C1210X Buy Now
C1808X Buy Now
C1812X Buy Now
C1825X Buy Now
C2220X Buy Now
C2225X Buy Now

Featuring a 125°C maximum operating temperature and considered "temperature stable," these devices address the primary failure mode of MLCCs—flex cracks, which are typically the result of excessive shear stresses produced during board flexure or thermal cycling. Utilizing a conductive silver epoxy between the base metal and nickel barrier layers of KEMET’s standard termination system, flexible termination technology directs board flex stress away from the ceramic body and into the termination area, therefore mitigating flex cracks which can result in low IR or short circuit failures. Although flexible termination technology does not eliminate the potential for mechanical damage that may propagate during extreme environmental and handling conditions, it does provide superior flex performance over standard termination systems.

The HV FT-CAP offers low leakage current, exhibits low ESR at high frequencies and finds conventional use as snubbers or filters in applications such as switching power supplies and lighting ballasts. Their exceptional performance at high frequencies has made them a preferred choice of design engineers worldwide.

Combined with the stability of an X7R dielectric and designed to accommodate all capacitance requirements, these flex-robust devices are RoHS-compliant, offer up to 5mm of flex-bend capability and exhibit a predictable change in capacitance with respect to time and voltage. Capacitance change with reference to ambient temperature is limited to ±15% from -55°C to +125°C.


  • -55°C to +125°C operating temperature range
  • Superior flex performance (up to 5mm)
  • Pb-Free and RoHS compliant
  • EIA 0805, 1206, 1210, 1808, 1812, 1825, 2220 and 2225 case sizes
  • DC voltage ratings of 500V, 630V, 1KV, 1.5KV, 2KV, 2.5KV and 3KV
  • Capacitance offerings ranging from 62pF to 0.27μF
  • Available capacitance tolerances of ±5%, ±10% or ±20%
  • Low ESR and ESL
  • Non-polar device, minimizing installation concerns
  • 100% pure matte tin-plated end metallization allowing for excellent solderability
  • SnPb plated end metallization option available upon request (5% min)


  • Switch mode power supplies
  • Telecom
  • Medical
  • Mil/Aero
  • Semiconductors
  • Test/Diagnostic equipment