AMPMODU-Locking-Clip-Tyco-Electronics.jpgAMPMODU Locking Clips | TE Connectivity
AMPMODU Locking Clips from TE Connectivity features 1-20 position, single and double row housings. The modular housing design permits end-to-end stacking for circuit grouping. Offered with wire size range of 20 AWG, 26-22 AWG and 30-28 AWG for 0.100 centerline and 22-18 AWG for 0.156 centerline. Crimp snap-in self-training contacts provide permanent connection with quick connect and disconnect.

AMPMODU-Mod-IV-Tyco-Electronics.jpgAMPMODU Mod IV Connectors | TE Connectivity
AMPMODU Mod IV from TE Connectivity features up to 100 position, single and double row housings. Optional detent latching, polarizations and bonded strain relief/pull tab housing design. Offered with wire size range of 20-24 AWG, 22-26 AWG and 32-27 AWG. Crimp snap-in receptacle contacts provide insulation support.

AMPMODU-Level-V-Connectors-Tyco-Electronics.jpgAMPMODU IV & V Connectors | TE Connectivity
AMPMODU IV & V Connectors provide a wide variety of rugged and reliable wire-to-board interconnections on a modular .100" x .100" (2.54 x 2.54) centerline configuration, which mate to AMPMODU Mod II shrouded & unshrouded headers with a .025" (0.64) square post. The connectors include AMPMODU IV & V wire-applied crimp contacts and housings with three levels of contact mating pressures with single and double row configurations available in .100 CL, .125 CL, and .150 CL.

AMPMODU-MTE-Connectors-Tyco-Electronics.jpgAMPMODU MTE Connectors | TE Connectivity
AMPMODU MTE Connectors utilize the "Short Point" contact, available in IDC and crimp termination types. Latching capability provides positive retention between housings. Coupling shrouds permit ganging of receptacle assemblies for double-row configurations. Panel mount version available.

AMPMODU-Short-Point-Connectors-Tyco-Electronics.jpgAMPMODU Short Point Connectors | TE Connectivity
AMPMODU Short Point Connectors from TE Connectivity are available in 4-64 position, dual row, non-polarized and polarized housing. The wire size range options of 20-24 AWG, 22-26 AWG and 32-28 AWG. Features crimp snap-in contacts with dual cantilever contact beams and unique locking latch design.

AMPMODU-Mini-Tandem-Spring-Connectors-Tyco-Electronics.jpgAMPMODU Mini-Tandem Spring Connectors | TE Connectivity
AMPMODU Mini-Tandem Spring Connectors from TE Connectivity are available in 2-22 single row and 4-20 double row receptacle housing with wire size range options of 26-22 AWG and 32-22 AWG. The individual contacts mate with 0.64 [0.025] square posts, 3.18 [0.125] long. Featuring standard, intermediate and high pressure contacts.

AMPMODU-HE-13-HE-14-Tyco-Electronics.jpgAMPMODU HE 13 & AMPMODU HE 14 Interconnection System | TE Connectivity
AMPMODU HE 13 & HE 14 Interconnection System from TE Connectivity features 2-20 position, single and double row header housings. The IDC Receptacle housing is 1-18 single row or 2-36 double row. Options include vertical and right-angle headers, receptacle assemblies preloaded with insulation displacement contacts to terminate discrete wire or 2.54 mm ribbon cables. Featuring the protective header shrouded and integrated detent latching device. Compliant to the CEI IEC 603-8 international standard.

AMPMODU-Level-V-Connectors-Tyco-Electronics.jpgAMPMODU Level V Connectors | TE Connectivity
AMPMODU Level V Connectors from TE Connectivity features 8-40 position pre-loaded, double row IDC receptacle housings. Options include snap-on covers with or without cable tie paddles, stackable end-to-end and side-to-side. Terminates 26-22 AWG [0.12-0.3mm²] discrete wire as well as jacketed cable and boned ribbon cable (conductors separated).

AMPMODU-MT-Connector-Tyco-Electronics.jpgAMPMODU MT Connector | TE Connectivity
AMPMODU MT Connector from TE Connectivity features 6-64 position, double row housing. Featuring a wire-to-board insulation displacement system with low profile (non-polarized, polarized, latching and ejection) and standard profile (hermaphroditic and ejection) cover styles. The connector housings may be stacked end-to-end within one pair of covers.

Additional Information