BNC-Connectors-Tyco-Electronics.jpgBNC Connectors | TE Connectivity
The AMP BNC RF connector family with bayonet locking coupling provides highly reliable, quick connect / disconnect coaxial connections. Exclusive single and O crimp terminations allow positive insulation grip and require no soldering, providing terminations at a very low overall applied cost.

Decoupled-BNC-RF-Connectors-Tyco-Electronics.jpgBNC RF Connectors Decoupled | TE Connectivity
AMP Capacitively Decoupled connectors provide the fast, sure way to reduce noise and eliminate ground loops on coaxial interconnections. The high-frequency noise generated by fast rise times can cause both false triggering of circuits as well as emissions that can be radiated or conducted outside the equipment. Such emissions can interfere with nearby equipment. Ground loops are also a problem for networked systems. Ground loops are caused when two interconnected units are at different voltage potentials.

Mini-BNC-Connectors-Tyco-Electronics.jpgMini BNC Connectors | TE Connectivity
TE Connectivity has developed the Mini BNC series of RF connectors to meet the growing demand for next generation telecommunications and broadband applications where higher connector densities are needed. Preserving the characteristics that have made the standard BNC so popular, the Mini BNC offers the same high performance currently found in standard TE Connectivity BNC series, but offers 40% more interconnects in the same area.

BNC-Connectors-Tyco-Electronics.jpgBNC Connectors PC Board Self-Terminating | TE Connectivity
AMP Self-Terminating printed circuit board BNC connectors provide the capability to automatically terminate an input-output port to the system characteristic impedance. This feature eliminates the need for external terminators when an I/O port is not being used. The Self-Terminating BNC jack contains a chip resistor which bridges the signal and ground paths when the connector is not mated to a BNC plug. When mated, the resistor is switched out of the circuit for direct signal transmission to the board.

Twin-BNC-Connectors-Tyco-Electronics.jpgTwin BNC Connectors | TE Connectivity
The Twin BNC Connector is a quick connect/disconnect, weatherproof connector designed in accordance with MIL-C-39012 to meet the stringent requirements of MIL-STD-1553 Multiplex Data Bus. These twin coaxial cable connectors are a unique development by AMP which has resulted in the production of high level RF components. Termination of these connectors to twin conductor cable is made with AMP's exclusive one crimp method which simultaneously terminates inner conductors, outer braid and cable support with one stroke of the matching AMP tool. These rugged connectors accommodate today's most commonly used twin conductor cable sizes.

ZDC-BNC-Connectors-Tyco-Electronics.jpgBNC Connectors & ZDC Connectors | TE Connectivity
AMP Self-Terminating printed circuit board BNC connectors provide the capability to automatically terminate an input-output port to the system characteristic impedance. This feature eliminates the need for external terminators when an I/O port is not being used. The Self-Terminating BNC jack contains a chip resistor which bridges the signal and ground paths when the connector is not mated to a BNC plug. When mated, the resistor is switched out of the circuit for direct signal transmission to the board.

Additional Information