MATE-N-LOK-Connectors-240-Centerline-Tyco-Electronics.jpgMATE-N-LOK Connectors .240" Centerline, 250 v, 28 A max. | TE Connectivity
The .140 MATE-N-LOK Connector are available in 2, 3 and 9 circuit configurations for panel mounting; 4 and 9 circuit configurations for free hanging applications. Featuring standard natural nylon fully polarized housings protect contacts. Contacts accept wire size range 20-10 AWG [.5-5.0 mm2] with insulation diameters from .100 [2.54] to .180 [4.57].

High-Current-Connectors-312-Tyco-Electronics.jpgHigh Current Connectors .312 Centerline | TE Connectivity
AMP High Current Edge Connectors are an economical answer to the costly problem of interconnecting high current printed circuitry. Designed for a current capability of up to 30 amperes*, these connectors feature UL rated 94V-0, rugged glass-filled thermoplastic housings and high conductivity copper alloy contacts with bright tin-over-nickel plating. Contacts are on .312 [7.92] centers.

ampmultipin_tyco_thumb.jpgAmpower Multi-Pin Connectors Plus | TE Connectivity
Plug and receptacle housings and contacts are made from a modular mold to allow for many different configurations. Positions range from 2 to 65. Continuous current amperage ranges from 15 to 150 A.

mini_crown_thumb.jpgMini CROWN EDGE Connectors High Current | TE Connectivity
This is a family of low-profile, high-current power connectors for pluggable 1U and 2U Voltage Regulator Modules (VRM). All Mini CROWN EDGE connectors use ELCON high-performance CROWN BAND true power contacts, capable of 25A each. While there is a Mini CROWN EDGE connector configuration specifically designed for VRM 10.2 that can carry up to 150A, other layouts capable of 200A or more are also available.

High-Current-Connectors-312-Tyco-Electronics.jpgHigh Current Pins and Sockets | TE Connectivity
Thread Mount Sockets are designed for easy installation and removal. Thread Mount pins are designed for thread mount. The Threaded Sleeve Assembly is designed for High Current in a restricted space. Crimp Pins feature a mechanism for locking the pin into a housing designed by the customer. Crimp Sockets feature a mechanism for locking the socket into a housing designed by the customer. The Thread Mount Fork was developed to mount onto a plate or bus bar designed and fabricated by the customer.

sec_tyco_thumb.jpgSEC-II Power Connectors | TE Connectivity
The SEC-II Power Connectors offer an ideal combination of low-current and high-current connections in a single, durable design in a variety of combinations of power and signal contacts.

Multiple-Point-Interface-Contacts-Tyco-Electronics.jpgMultiple Point Interface Contacts (Louvertac Bands) High Current | TE Connectivity
The Torsional Louver Type Band was designed as an electrical interface that allows the transfer of high current and a more generous tolerance between mating surfaces. A strip can be sized with scissors in an on-site installation. They are available for use in flat and circular applications. A male band is used on the outside diameter of a pin. The female band is used on the inside diameter of a socket.
Request Quote

tyco_umnl_thumb.jpgUniversal MATE-N-LOK Connectors | TE Connectivity
The Universal MATE-N-LOK connector system is a robust and highly reliable connector system that utilizes a combination of pins and sockets intermixed in the plug and cap housings to achieve the maximum electrical performance in a 6.35mm centerline.

matenlok_two_thumb.jpgUniversal MATE-N-LOK II Connectors | TE Connectivity
Available in 2 through 15 circuit sizes for free hanging or panel mount wire-to-wire connection, the pins and sockets can be intermixed in the same housing. These connectors mate with standard Universal MATE-N-LOK housings and printed circuit board headers.

156_matelok_tyco_thumb.jpgMATE-N-LOK Connectors .156 | TE Connectivity
Three and four position receptacles (cap) and plugs that are free hanging or panel mount. Removable, crimp snap-in contacts accept 20-10 AWG wire sizes.

Additional Information