Unshielded Cable Clamps
One-Piece, All Plastic Cable Clamp for Jacketed Cable,
180°/120° Exit (HDP and HDE) (Quik Snap)
The AMP Quik-Snap Backshell Kit is a one-piece, all-plastic cable clamp kit designed for use with either the AMPLIMITE HDP-20, HDP-22 or HDE all-plastic or metal-shell connectors. Kits are available for connector sizes 1, 2, 3 and 4 with a cable exit option of 180° or 120°.
One-Piece, All Plastic Cable Clamp for Jacketed Cable,
180°/120° Exit, and HDP-20 and HDE-20 Connector
The AMPLIMITE Quik-Snap Backshell and Connector kit presents a complete package for your unshielded subminiature D connector needs. Kits are available for Shell Sizes 1, 2 and 3, and are packaged 25 and 100 kits per unit.
Straight Exit Low Profile for Jacketed Cable
Low Profile Cable Clamps feature a two-piece construction which allows the two cover halves to be snapped together, no hardware is required for assembly. They can be used on plugs or receptacles and will not interfere with commonly used mating hardware. Sufficient Cable Support Gates (or a Cable Support Gate Latch) are supplied with each cable clamp kit to achieve adjustable clamping over a wide range of jacketed cable diameters.
Box and Lid
Straight/90° Exit
Box and Lid Cable Clamps can be used on either plugs or receptacles and will not interfere with commonly used hardware. Their hinged construction allows easy assembly to a harness. A wide range of cable diameters are accommodated through the use of cable support gates, supplied with each cable clamp.
Cable clamps are available in kits with appropriate hardware for convenient plug/receptacle mating.
Clam Shell
Straight/45° Exit
Straight/45° Exit Cable Clamps can be used on either a plug or receptacle and will not interfere with commonly used hardware, such as Male Screw Retainers, Female Screwlocks, or Spring Latches and Latching Blocks. Their hinged construction allows easy assembly to a harness. Also, the straight or 45° angle of the cable exit is achieved by merely positioning the Cable Support Gate for the desired angle prior to installing the assembly onto the plug or receptacle.
Cable clamps are available in kits with appropriate hardware for convenient plug/receptacle mating.
Straight/90° Exit
Straight/90° Exit Cable Clamps can be used on a plug or receptacle and will not interfere with commonly used mating hardware. Their three-piece construction allows easy assembly to a cable harness. Also, the same cable clamp components are used for both straight and 90° cable exit applications. This is accomplished by simply positioning the Male and Female Panels on the Yoke for the desired angle.
Shielded Cable Clamps
Straight Exit RFI/EMI Shields for Jacketed Cable (Two-Piece)
This RFI/EMI shield allows cable to be fully prepared and terminated to the connector before the shield is installed. During installation, the shield of the jacketed cable is folded back and compressed into the cable opening of the RFI/EMI shield. For greater cable support and/or shielding effectiveness, split-ring and crimp ferrules are available.
Straight Exit RFI/EMI Die Cast Shield for Jacketed Cable (Two-Piece)
Both the straight exit and the 90° exit die cast RFI/EMI shield allows cable to be fully prepared and terminated to the connector before the shield is installed. During installation, the shield of the jacketed cable is folded back and compressed into the cable opening of the RFI/EMI shield. For greater cable support and/or shielding effectiveness, split-ring and crimp ferrules are available.