Vishay Through Hole Pots & Trimmers

TTI features the following Product Families that relate to Through Hole Potentiometer & Trimmer Resistors.

Vishay Model 43 Trimmer ResistorsModel 43 - 3/4" Rectangular (19 mm) Multi-Turn Cermet Trimmer
Vishay Spectrol Model 43 is manufactured to the highest international standards. This product is sealed to 85 °C for 1 minute (IEC. 68-2-17), has an effective travel of 18 turns nominal, and a resistance range from 10 Ω to 2 MΩ. Panel mount and clear lid versions are available. (View Datasheet)

Vishay Model 63 Trimmer ResistorsModel 63 - 3/8" Square (10 mm) Single-Turn Cermet Trimmer
Vishay Spectrol Model 63 cermet trimmer manufactured in Europe is readily available in several pin configurations for top or side adjustment and with a choice of Knob styles for finger setting. Quick adjustment is achieved with multi finger wiper and the standard resistance range is between 10 Ω and 2 MΩ with a tolerance of ± 10 %. (View Datasheet)

Vishay T63 Trimmer ResistorsT63 Series - 1/4" Multi-Turn Sealed Container Cermet Trimmer
Vishay Sfernice multi-turn trimmers of the T63 series are ideally suited for PCB use, enabling high density board mounting with reduced space requirement between cards. Four versions are available differing by the top or side position of the adjustment screw and by PC pins configuration. (View Datasheet)

Vishay T93 Trimmer ResistorsT93 Series - 3/8" Square Multi-Turn Cermet Trimmer
Vishay Sfernice T93 trimmer is a small size trimmer - 3/8" x 3/8" x 3/16" - answering PC board mounting requirements. Five versions are available which differ by the position of the control screw in relation to the PC board plane and by the spacing of the terminals. (View Datasheet)

Vishay P16/PA16 Potentiometer Resistors P16/PA16 Series - Knob Potentiometer
Vishay Sfernice P16 series is a revolutionary concept in panel mounted potentiometers. This unique design consists of a knobdriving and incorporating a cermet potentiometer. Only the mounting hardware and terminals are situated on the back side of the panel reducing to a minimum the required clearance. (View Datasheet)

Vishay P11/PA11 Potentiometer ResistorsP11/PA11 - Modular Potentiometer with Cermet or Conductive Plastic Elements
Vishay Sfernice P11/PA11 models feature five shaft diameters and 12 terminal styles, multiple assemblies - up to seven modules, and up to twenty-one indent positions. A miniature module size: 12.5 mm square with low current compatibility is available. (View Datasheet)

Vishay Models 148/149 Potentiometers ResistorsModels 148/149 - 1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometer
Vishay Spectrol Models 148 and 149 potentiometers offer an end resistance of 4 Ω maximum at each end, and a TCR of ± 1000 ppm/°C ± 150 ppm/°C for the 148 and 149 models respectively. Model 148 features a conductive plastic element, a high rotational life of 50,000 cycles, and a quiet electrical output. Model 149 features a cermet element, and a rotational life of 25,000 cycles.
(View Datasheet)

Vishay Models 248/249 Potentiometers Resistors Models 248/249 - 1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometer
Vishay Spectrol Model 248 and 249 retain the proven high performance characteristics in a more cost effective package. Model 248 contains a conductive plastic element, while Model 249 contains a cermet element. Total resistance ranges from 500 Ω to 500 kΩ. (View Datasheet)

Vishay PRV6 Potentiometer Resistor PRV6 Series - Fully Sealed Potentiometers Cermet
Vishay Sfernice PRV6 potentiometers feature a high power rating of 1.5 Watts at 70 °C, a mechanical life 50,000 cycles, and a temperature coefficient of ± 100 ppm/°C. Vishay PRV6 potentiometers are fully sealed and are rated for an extended - 55 °C to + 125 °C operating temperature range. (View Datasheet)

Vishay RJ13 Cermet TrimmerRJ13 Series - Single Turn Cermet Trimmer
Vishay RJ13 series feature a Lead (Pb) free soldering, a metal alloy wiper, and a resistance range from 10Ω to 5MΩ. The RJ13 cermet trimmers have a resistance range from 10 Ω to 5 MΩ, and a resistance tolerance of ± 10%.

Vishay T7 Trimmer ResistorT7 Series - Miniature Cermet Trimmer
Vishay Sfernice T7 series is only 7 mm (0.275") in diameter and fits almost anywhere. A dust sealed plastic case protecting a quality cermet track guarantees high performance and proven reliability. Adjustments are made easier by the clear scale readings. Vishay T7 cermet trimmer is ideally suited to all industrial applications. (View Datasheet)

Vishay T73 Trimmer ResistorT73 Series - 1/4" Square Single-Turn Cermet Sealed Trimmer
Vishay Sfernice T73 series is fully sealed, capable to withstand harsh environments and immersion cleaning processes. The rotor is designed for automatic machine adjust interface. Vishay T73 trimmers come in a miniature package and have a resistance range from 10 Ω to 2 MΩ, and a temperature coefficient of ± 100 ppm/°C. (View Datasheet)

Vishay P8P Potentiometer ResistorP8P Series - Fully Sealed Container Cermet Trimmer
Vishay Sfernice Models P8PX and P8PY feature a TO-5 transistor type, and rugged metal case housing. The cermet track is printed to an alumina substrate allowing high dissipation and ensuring reliable performance under extreme environmental conditions. The P8PX and P8PY models feature a power rating of 0.5 W at 70 °C, and 1 W at 70 °C for the P8PT model.
(View Datasheet)